optoway gbs-92120f-cxx0g ********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 1 gbs-92120f-cxx0g (rohs compliant) 5v / cwdm / 2.125 gb/s single-mode gigabit interface converter (gbic) ********************************************************************************************************************************************************************** features l 18-wavelength cwdm gbic transceivers l up to 2. 5 gbps bi-directional data links l compliant with 1x / 2x fibre channel fc-pi 13.0 l compliant with gigabit interface converter (gbic) specification rev. 5.5 l cwdm dfb laser transmitter l apd high sensitivity receiver l multi-rate operation for 2.5 / 2.125 / 1.062 / 1.25 gbps l duplex sc connector l 30 db power budget at least l sca-2 host connector l single +5 v power supply l rohs compliant l differential pecl inputs and outputs l ttl rx-los output l hot pluggable l class 1 laser international safety standard iec-60825 compliant applications l switch to switch interface l high speed interface for file servers l bus extension application l data storage l dual rate 1.06 / 2.125 gb/s fibre channel description the gbs-92120f-cxx0g series optical transceivers meet the gigabit interface converter (gbic) specification rev. 5.5. it satisfies the optical interface specifications defined in ieee 802.3z drift 5.0 1000 base-sx for gigabit ethernet and 1x/2x fiber channel fc-pi13.0. this module is designed for single-mode fiber and operates at a nominal wavelength of cwdm. there are eighteen center wavelengths available from 1270 nm to 1610 nm, each step 20 nm. a guaranteed minimum optical link budget of 30 db is offered. the transmission distance is depended on the wavelength and loss of fiber. the transmitter section uses a multiple quantum well cwdm dfb laser and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. a pecl input / output logic interface is used. ttl rx-los output simplifies interface to external circuitry. a 20-pin sca-2 host connector is used to connect the converter to the host system. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) fc-pi power budget (db) wavelength (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) rohs compliant gbs-92120f-cxx0g 2.125/1.063 200/100 > 30 cwdm * sc gbic 0 to 70 5 to 0 -30 yes cwdm wavelength (0 to 70 o c) central wavelength min. (nm) typ. (nm) max. (nm) central wavelength min. (nm) typ. (nm) max. (nm) -c270 1264.5 1270 1277.5 -c450 1444.5 1450 1457.5 -c290 1284.5 1290 1297.5 -c470 1464.5 1470 1477.5 -c310 1304.5 1310 1317.5 -c490 1484.5 1490 1497.5 -c330 1324.5 1330 1337.5 -c510 1504.5 1510 1517.5 -c350 1344.5 1350 1357.5 -c530 1524.5 1530 1537.5 -c370 1364.5 1370 1377.5 -c550 1544.5 1550 1557.5 -c390 1384.5 1390 1397.5 -c570 1564.5 1570 1577.5 -c410 1404.5 1410 1417.5 -c590 1584.5 1590 1597.5 -c430 1424.5 1430 1437.5 -c610 1604.5 1610 1617.5 cwdm * : 18 wavelengths from 1270 nm to 1610 nm, each step 20 nm.
optoway gbs-9010fg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 2 absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating temperature topr -5 70 o c air flow 1m/sec power supply voltage vcc -0.5 6 v input voltage --- -0.5 vcc v recommended operating conditions parameter symbol min typ max units conditions power supply voltage vcc 4.75 5 5.25 v reference to gnd. power supply current i tx + i rx 200 300 ma operating temperature topr 0 70 o c air flow 1m/sec data rate 1.0625 / 1.25 2.125 / 2.5 2.5 gb/s transmitter specifications (0 o c < topr < 70 o c, 4.75v < vcc < 5.25v) parameter symbol min typ max units notes optical optical transmit power po 0 --- 5 dbm 1 output center wavelength l l -5.5 l l +7.5 nm 2 output spectrum width dl --- 1 nm -20 db width side mode suppression ratio smsr 30 db extinction ratio e r 9 --- db optical rise time t r 150 ps 20% to 80% value optical fall time t f 150 ps 20% to 80% value electrical differential input voltage v ih - v il 0.65 2.0 vp-p transmit fault load tx-fault load 4.7 10 k 3 transmit fault output-low v tx-fault -l 0.0 0.5 v transmit fault output-high v tx-fault-h vcc C 0.5 vcc + 0.3 v tx-disable input - low v tx-disable -l 0 0.8 v tx-disable input - high v tx-disable-h 2.0 vcc + 0.3 v tx-disable assert time t_off 10 m s tx-disable negate time t-on 1 ms time to initialize, includes reset of tx-fault t-int 300 ms tx fault from fault to assertion t-fault 100 m s tx-disable time to start reset t-reset 10 m s 1. output power is power coupled into a 9/125 m m sm fiber. 2. itu-t g.694.2 cwdm wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. pull-up resistor on host vcc.
optoway gbs-9010fg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 3 receiver specifications (0 o c < topr < 70 o c, 4.75 v < vcc < 5.25v) parameter symbol min typ max units notes optical sensitivity @2.125gb/s @ ber=10 -12 sens --- --- -30 dbm 4 maximum input power pin -9 --- dbm 4 signal detect C hysteresis 1.0 --- db wavelength of operation 1260 --- 1620 nm rx-los C asserted pa --- --- -30 dbm transition: low to high rx-los C deasserted pd -40 --- --- dbm transition: high to low electrical differential output voltage rx-dat 0.37 2.0 vp-p data output rise time tr rx-dat 0.35 ns data output fall time tf rx-dat 0.35 ns receiver loss of light load rx-los load 4.7 10 k 5 loss of signal output voltage --- low rx-los l 0 0.5 v loss of signal output voltage --- high rx-los h 2.4 vcc v loss of signal assert time (off to on) t a,rx-los 100 m s loss of signal deassert time (on to off) t d,rx-los 100 m s 4. minimum sensitivity and saturation levels at ber=1e-12 for a 2 7 -1 prbs. 5. pull-up resistor on host vcc.
optoway gbs-9010fg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 4 pin assignment pin signal name sequence description 1 rx-los 2 receiver loss of signal, logic high, open collector compatible, 4.7k to 10k ohm pull-up to v cc t on host 2 r gnd 2 receiver ground 3 r gnd 2 receiver ground 4 mod-def(0) 2 ttl low 5 mod-def(1) 2 scl serial clock signal 6 mod-def(2) 2 sda serial data signal 7 tx-diable 2 transmitter disable, logic high, open collector compatible 8 t gnd 2 transmitter ground 9 t gnd 2 transmitter ground 10 tx-fault 2 transmitter fault, logic high, open collector compatible, 4.7k to 10k ohm pull-up to v cc t on gbic 11 r gnd 1 receiver ground 12 -rx-dat 1 receiver data bar, differential pecl, ac coupled 13 +rx-dat 1 receiver data, differential pecl, ac coupled 14 r gnd 1 receiver ground 15 v cc r 2 receiver +3.3v supply 16 v cc t 2 transmitter +3.3v supply 17 t gnd 1 transmitter ground 18 +tx-dat 1 transmitter data, differential pecl, ac coupled 19 -tx-dat 1 transmitter data bar, differential pecl, ac coupled 20 t gnd 1 transmitter ground a sequence value of 1 indicates that the signal is in the first group to engage during plugging of a module. a sequence value of 2 indicates that the signal is the second and last group. the two guide pins on the connector are electrically connected to the transceiver circuit ground. these two guide pins make contact with circuit prior to sequence 1 signals. module definition module definition mod-def(0) pin 4 mod-def (1) pin 5 mod-def (2) pin 6 interpretation by host 4 ttl low scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, mod-def(1:2) appear as no connector (nc) and mod-def(0) is ttl low. when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway gbs-9010fg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 5 package diagram units in mm note: specifications subject to change without notice.
|
